_____

GRADEN INDUSTRIES

H900 / H 1050

H 900 / H 1050

Graden Turf Machinery are pleased to present a new Australian made and designed mower built specifically for Australian conditions. The cutting deck and chassis are of welded steel construction making for a robust machine which can take harsh treatment while still producing a quality finish. The cutting deck is available in two sizes, 915mm (36") and 1050mm (42") cutting widths powered by a 16hp motor. Drive is supplied by the reliable Peerless VST 205 series transaxle which is factory sealed. These features are just some of the reasons why you should choose a Graden mower.

TOUGH...RELIABLE...AUSTRALIAN

Graden are proud to present a quality Australian designed and manufactured tractor style mower to the market. This new mower comes with a choice of 36" or 42" cutting widths and is fitted with the Briggs & Stratton 16hp Vanguard engine.

The cutter deck is built with the same strength as the rest of the Graden range; welded steel construction as opposed to the thin pressed steel of most other mowers on the market.

Drive is supplied by the Peerless VST 205 Hydrostatic transmission, providing forward and reverse as well as a dynamic brake all via the one foot pedal.

The seat is fitted with a slide to allow the operator to find the most comfortable working position. A drain hole in the seat allows the water to drain away easily. The seat is also fitted with a safety switch to stop the motor if the operator leaves the seat whilst the blades are engaged.

FEATURES INCLUDE:

Hydrostatic drive system
Infinitely variable drive speed
Easy to operate and maintain
Heavy duty construction
Safety switch on adjustable seat

SPECIFICATIONS

ENGINE: Briggs & Stratton 16hp Vanguard
OHV - Industrial/Commercial
Unleaded petrol

DRIVE: Hydrostatic - Peerless VST 205
Forward/Reverse - Variable Speed
Belt drive from engine to transmission

WHEELS: Front - 13x5.00-6 tubeless tyres with precision bearing
wheel rims
Rear - 18x9.50-8 tubeless tyres onto keyed wheel rims

BLADES: Option of solid bar blades or swing-tip blades on request

CUTTING HEIGHT: Variable up to 80mm (approx. 3")

CUTTING DRIVE: Warner electric clutch
Belt drive from engine to clutch
Belt drive from clutch to cutter heads

CUTTING WIDTH: 915mm (36") or 1050mm (42")

WIDTH: 940mm (37") or 1090mm (43")

LENGTH: 1520 (60")

HEIGHT: 1000 (39.5")

OTHER FEATURES:

Heavy duty chassis
Heavy duty precision bearings in front wheels
Turf Trak tyres for maximum traction
Safety switch on adjustable seat for operator safety
Single lever height adjustment for easy deck lift

The specifications shown above are subject to change without notice.

Print this page request more information
Graden Industries - ph: +61 3 9305 3400 fax: +61 3 9305 3995